The Eagle EHS recessed impeller solids handling pump has the unique ability to handle large particles and fibrous solids. The full recessed impeller and extra-wide casing allows and solid size entering the suction inlet to pass through the discharge nozzle.

Also available:  Vertical cantilever arrangement (EVHS).

See a video of this pump

Various materials of construction:
28% Chrome Iron, Cast Iron and Stainless Steel

Available in 5 sizes up to 200mm discharge.

Capacities to 1090 m3/h
Heads to 43 meters
Temperature to 110 C
Spherical solids to 200 m/m

SERVICES

Mining:
Carbon Slurry 
Coal Slurry 
Iron Oxide Slurry
 
Waste Treatment:
Raw Sewage 
Sewage Sludge 
 
Foundries and Steel Mills:
Mill Scale 
Water and slag
Grit
 
Pulp and Paper:
Paper stock 
Plant Effluent 
Black Liquor 
Filtrate

New Dry Seal (Optional) 
Especially designed rotative and static seal requires no seal water, eliminating the possibilities of product contamination and stuffing box leakage. The Dry Seal is suitable for use in pumping large particle solids or abrasive slurries 

BEARINGS and FRAME
Four bearing frames accommodate all EHS models. Bearings are mounted in single housings for accurate alignment.
Available for either oil or grease lubrication.

STUFFING BOX 
Easily accessible for service, the Stuffing Box will accommodate conventional packaging, a mechanical seal, or the new Dry Seal.

SHAFT and SHAFT SLEEVE
Rugged high carbon steel shaft protected in stuffing box area by "hooked" shaft sleeve keyed to shaft.

PUMP SIZES 
The EHS pump is available with discharge sizes 2, 3, 4, 6 and 8-inch with a variety of impeller diameters.

CASING
Rugged one-piece casing is designed to facilitate the flow of all types of solids-hard, soft, or fibrous. Back pull-out design permits service of rotating assembly without disturbing piping connections.

IMPELLER
Recessed impeller permits any material entering the intake to be expelled through the pump's discharge. The impeller may be fastened to the shaft either by a key and nut or thread-on.